![]() |
![]() |
|
Introduction WM307 is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in injection, blow film and compounding applications. Suitable for PP, PE materials. It features low dosage, high blackness, good brightness, excellent heat resistance, outstanding dispersibility and tinting power.
WM307 is a filled black masterbatch built for municipal pipe work where compound cost decides the tender. Carbon black is pre-dispersed, then compounded with a PE carrier, so it lets down cleanly at 2.0–6.0% in pipe compounds and 0.8–4.0% in injection-molded fittings. A compounding line running 4% puts about 40 kg of WM307 into every ton of resin, which works out to roughly 0.76% carbon black in the finished compound.
Where WM307 goes Corrugated and structured-wall drainage pipe compounds
Most corrugated HDPE and PP sewer pipe producers buy natural resin and build the black in-house: their own compounding extruder, their own regrind share, their own carbon black target. WM307 is made for that step. As a filled grade it carries mineral filler alongside the pigment, so every kilogram added displaces part of the virgin resin as well as coloring the compound. Pellet form keeps carbon black dust off the plant floor and out of the weighing step.
Injection fittings, manholes and inspection chambers
A sewer system is pipe plus everything that joins it: bends, junctions, reduction rings, chambers. These parts run 0.8–4.0% WM307 in PE or PP. The 40–55 melt flow, measured at 190°C/10 kg, is the highest in our range. Thin-walled fittings fill without raised injection pressure, and on fast compounding lines the masterbatch disperses early instead of smearing into streaks.
Black compounds and outdoor film
Compounding plants that sell black PE/PP granules, and film lines producing garbage bags and covers that sit in the yard between production and use, run WM307 at 4.0–8.0%. What sewer pipe buyers actually specify
Pipe standards around the world converge on the same small set of numbers. Gravity drainage and sewer specifications such as EN 13476 in Europe and the ASTM D3350 cell-classification practice used for corrugated pipe in North America expect finely dispersed carbon black in the pipe wall. Most specifications target 2.0–2.5% carbon black in the finished material, measured by ISO 6964 or ASTM D1603, with dispersion assessed by ISO 18553 or ASTM D5596. Qualified pipe compounds typically rate Grade 2 or better.
One fact matters more than any single number: burial. Sunlight reaches the pipe only while it is stacked in the yard or riding on a truck; once backfilled, there is no UV in the trench. Engineering literature from the Plastics Pipe Institute notes that around 1% finely dispersed carbon black protects HDPE through a multi-year outdoor storage window, and that carbon black well beyond what storage needs makes the pipe wall more brittle without buying anything. Non-pressure sewer and drainage compounds therefore run to a different target than potable-pressure pipe: enough black for the storage phase and the job site, plus a compound price that wins municipal tenders.
Technical Parameter
Compliance and documentation
WM307 is RoHS compliant. It is a non-pressure pipe grade: potable water supply pipe and drip irrigation carry stricter requirements and have their own dedicated grades (see how our black masterbatch meets water-supply-pipe requirements). Custom loading, carrier or packaging is available through our OEM black masterbatch service.
Frequently asked questions How much WM307 do I need for 1% carbon black in the compound? At 19% loading, 5.3% let-down, about 53 kg per ton of resin. For any other target, divide the target by 0.19. The pipe is buried. Why weather-resistant? It is buried after installation, not before. Pipe sits in open storage and on trucks for weeks or months, and that is the exposure the carbon black has to cover. Can WM307 meet an EN 13476 compound at 2.0–2.5% carbon black? Arithmetically yes, at roughly 10–13% let-down. At that point compare total compound cost against a higher-concentration black. Send us the specification and we will help you run the comparison. Does more carbon black make a stronger pipe? No. Beyond what the storage window needs, extra carbon black tends to embrittle the wall and hurt impact performance. Dose to what the specification asks and stop there. What documents come with an order? Tell us what your quality system requires and we will confirm what we can supply before you commit. Can we test on our own line first? That is the right way to qualify a masterbatch. Request a sample with your resin grade, regrind share and line details through our OEM service, and we will suggest a starting let-down. Packaging and storage 25 kg per bag, PE or composite paper. Store dry, enclosed and cool, away from direct sunlight. Reseal opened bags to keep moisture out.
Ready to price a municipal compound? Send the pipe standard, the base resin and your regrind share, and we will come back with a let-down, a cost figure and a sample.
Packing and Storage 25kg/bag, PE or Composite Paper bag Stored under dry, enclosed and cool conditions, protected from UV rays and/or direct sunlight. After used, the opened packaging must be resealed properly to prevent the product from absorbing moisture, which could affect its performance.
Note The technical results are typical values and are provided for customer reference only. They are not to be regarded as a guarantee of minimum or maximum quality specifications. |
|||||||||||||||||||
![]() |
Introduction
WM307 is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication.
It is widely used in injection, blow film and compounding applications. Suitable for PP, PE materials. It features low dosage, high blackness, good brightness,
excellent heat resistance, outstanding dispersibility and tinting power.
WM307 is a filled black masterbatch built for municipal pipe work where compound cost decides the tender. Carbon black is pre-dispersed, then compounded with a PE carrier,
so it lets down cleanly at 2.0–6.0% in pipe compounds and 0.8–4.0% in injection-molded fittings.
A compounding line running 4% puts about 40 kg of WM307 into every ton of resin, which works out to roughly 0.76% carbon black in the finished compound.
Where WM307 goes
Corrugated and structured-wall drainage pipe compounds
Most corrugated HDPE and PP sewer pipe producers buy natural resin and build the black in-house: their own compounding extruder, their own regrind share, their own carbon black target.
WM307 is made for that step. As a filled grade it carries mineral filler alongside the pigment, so every kilogram added displaces part of the virgin resin as well as coloring the compound.
Pellet form keeps carbon black dust off the plant floor and out of the weighing step.
Injection fittings, manholes and inspection chambers
A sewer system is pipe plus everything that joins it: bends, junctions, reduction rings, chambers. These parts run 0.8–4.0% WM307 in PE or PP.
The 40–55 melt flow, measured at 190°C/10 kg, is the highest in our range.
Thin-walled fittings fill without raised injection pressure, and on fast compounding lines the masterbatch disperses early instead of smearing into streaks.
Black compounds and outdoor film
Compounding plants that sell black PE/PP granules, and film lines producing garbage bags and covers that sit in the yard between production and use, run WM307 at 4.0–8.0%.
What sewer pipe buyers actually specify
Pipe standards around the world converge on the same small set of numbers.
Gravity drainage and sewer specifications such as EN 13476 in Europe and the ASTM D3350 cell-classification practice used for corrugated pipe in North America
expect finely dispersed carbon black in the pipe wall. Most specifications target 2.0–2.5% carbon black in the finished material,
measured by ISO 6964 or ASTM D1603, with dispersion assessed by ISO 18553 or ASTM D5596.
Qualified pipe compounds typically rate Grade 2 or better.
One fact matters more than any single number: burial. Sunlight reaches the pipe only while it is stacked in the yard or riding on a truck; once backfilled, there is no UV in the trench.
Engineering literature from the Plastics Pipe Institute notes that around 1% finely dispersed carbon black protects HDPE through a multi-year outdoor storage window,
and that carbon black well beyond what storage needs makes the pipe wall more brittle without buying anything.
Non-pressure sewer and drainage compounds therefore run to a different target than potable-pressure pipe: enough black for the storage phase and the job site,
plus a compound price that wins municipal tenders.
Technical Parameter
| CB Content | 19%±2.0 |
| Carrier | PE |
| MFI | 40-55 (g/ 10min(190℃ 10kg) |
| Moisture | ≤0.1% |
| Dispersion | Excellent (≤ Level 3.0) |
| Compliance | RoHS |
| OEM | Accepted |
| Dosage | Injection: 0.8-4.0%,Film blowing: 4.0–8.0% Compounding: 2.0–6.0% (advice) |
| Application | Injection,Compounding,Blow film (garbage bag) |
Compliance and documentation
WM307 is RoHS compliant. It is a non-pressure pipe grade: potable water supply pipe and drip irrigation carry stricter requirements and
have their own dedicated grades (see how our black masterbatch meets water-supply-pipe requirements).
Custom loading, carrier or packaging is available through our OEM black masterbatch service.
Frequently asked questions
How much WM307 do I need for 1% carbon black in the compound?
At 19% loading, 5.3% let-down, about 53 kg per ton of resin. For any other target, divide the target by 0.19.
The pipe is buried. Why weather-resistant?
It is buried after installation, not before. Pipe sits in open storage and on trucks for weeks or months, and that is the exposure the carbon black has to cover.
Can WM307 meet an EN 13476 compound at 2.0–2.5% carbon black?
Arithmetically yes, at roughly 10–13% let-down. At that point compare total compound cost against a higher-concentration black. Send us the specification and we will help you run the comparison.
Does more carbon black make a stronger pipe?
No. Beyond what the storage window needs, extra carbon black tends to embrittle the wall and hurt impact performance. Dose to what the specification asks and stop there.
What documents come with an order?
Tell us what your quality system requires and we will confirm what we can supply before you commit.
Can we test on our own line first?
That is the right way to qualify a masterbatch. Request a sample with your resin grade, regrind share and line details through our OEM service, and we will suggest a starting let-down.
Packaging and storage
25 kg per bag, PE or composite paper. Store dry, enclosed and cool, away from direct sunlight. Reseal opened bags to keep moisture out.
Ready to price a municipal compound? Send the pipe standard, the base resin and your regrind share, and we will come back with a let-down, a cost figure and a sample.
Packing and Storage
25kg/bag, PE or Composite Paper bag
Stored under dry, enclosed and cool conditions, protected from UV rays and/or direct sunlight. After used, the opened packaging must be resealed properly to prevent the product from absorbing moisture, which could affect its performance.
Note
The technical results are typical values and are provided for customer reference only. They are not to be regarded as a guarantee of minimum or maximum quality specifications.
|
|

Introduction WM6245 is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in extrusion and high glossy injection applications. Suitable for PC ABS/PC materia...

Introduction WM72 is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in film blowing and injection applications. Suitable for PP and PE materials. It fea...

Introduction WM70E2 is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in injection (both general and thin wall injection), blow molding and extrusion sh...

Introduction WM261YF is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in injection and modified compounding applications. Suitable for PP PE materials....

Introduction WM3F is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in water supply pipe,drip irrigation pipe,corrugated pipe and film blowing applicati...

Introduction WME1 is produced by unique process in which carbon black is pre-dispersed, then compounded with the polymer additive through plastication. It is widely used in injection, extrusion pipe and blow film applications. It features low dosage...

Introduction WM307 is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in injection, blow film and compounding applications. Suitable for PP, PE material...

Introduction WM30 is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in injection, modified compounding, pipe & sheet applications. Suitable for PP ,PE a...

Introduction WM101 is produced by polymer additive with pre-dispersed carbon black , then compounded with the basic resin through plastication. It is widely used in injection, pipe, blow film applications. It features low dosage, high blackness, goo...

Introduction WM8E is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in film blowing , blowing plastic and injection applications. Suitable for PP and PE...

Introduction WM2ADM is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in film blowing , blowing plastic and fiber applications. Suitable for PP and PE m...

Introduction Mulch film is judged in the field, not in the warehouse. By the time a roll reaches the bed former, three things have already decided how the film will behave for the rest of the season: how much carbon black is genuinely in the film, ...

Introduction WMB34 is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in injection and modified compounding applications. Suitable for PP PE ABS PA+GF...

Introduction WM913 is produced by pre-dispersed carbon black with polymer additive, then compounded through plastication. It is widely used in modified compounding applications. Suitable for PP PE ABS PPR ABS HIPS materials. It features low dosage...

Introduction WMEG11 is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in modified compounding and injection applications. Suitable for PP and PE materi...

Introduction WMB56, a low-odour black masterbatch for ABS, AS and PC appliance housings WMB56 is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in inje...

Introduction WM785D is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in modified compounding and injection applications. Suitable for PP and PE materia...

Introduction WM16H is produced by pre-dispered carbon black, and then compounded with basic resin. It is widely used in ABS, PC/AS high glossy injection and modifiled compounding applications. Suitable for PP PE PC/ABS GPPS POM GPPS PA+GF materials....

Introduction WM2A is produced by high-pigment carbon black with AS as carrier and special dispersion agent. Its carbon black is stable and blue-shape grade. Suitable for ABS PC high glossy injection materials, also PPO PPS PA PET etc. thermoplasti...

Introduction WM626 is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in extrusion and injection applications. Suitable for HIPS materials. It features lo...

Introduction WM6245 is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in extrusion and high glossy injection applications. Suitable for PC ABS/PC materia...

Introduction WM72 is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in film blowing and injection applications. Suitable for PP and PE materials. It fea...

Introduction WM70E2 is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in injection (both general and thin wall injection), blow molding and extrusion sh...

Introduction WM261YF is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in injection and modified compounding applications. Suitable for PP PE materials....

Introduction WM3F is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in water supply pipe,drip irrigation pipe,corrugated pipe and film blowing applicati...

Introduction WME1 is produced by unique process in which carbon black is pre-dispersed, then compounded with the polymer additive through plastication. It is widely used in injection, extrusion pipe and blow film applications. It features low dosage...

Introduction WM307 is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in injection, blow film and compounding applications. Suitable for PP, PE material...

Introduction WM30 is produced by unique process in which carbon black is pre-dispersed, then compounded with the basic resin through plastication. It is widely used in injection, modified compounding, pipe & sheet applications. Suitable for PP ,PE a...